Get high-performance with just 24-28dB from RF Elements’ UltraDish™

Get high-performance with just 24-28dB from RF Elements’ UltraDish™

RF Elements’ UltraDish™ TP Antennas are high-gain directional parabolic antennas with a lossless TwistPort™ connector that guarantees easy radio deployment and maintenance. The antennas are highly directional and have suppressed side lobes for ultimate performance.

Here is how the UltraDish™ delivers high-performance with just 24-28Db:


Beam Performance

UltraDishTM TP antennas have suppressed side lobe radiation that reduces interference and enables installation in areas with high noise levels. The gain of UltraDish™ TP Antennas is achieved by focusing the signal delivered via the TwistPort™ waveguide.


Wideband 5.1 – 5.9 GHz

Starting with version “V2”, you can utilize all benefits of the TwistPort™ eco-system and superb performance of TP antennas in wideband. TwistPort™ Adaptors V2 cover ultra-wideband spectrum: 5180-6400 MHz!


TwistPort™ Connector

UltraDish™ TP Antennas feature the industry changing TwistPort™ connector, patent pending quick-locking waveguide port. It was designed to guarantee a long-lasting bulletproof connection between radio and TwistPort™ compatible antennas in the most demanding outdoor environments. The TwistPort™ connector sets a new standard of outdoor wireless equipment in terms of performance, scalability, ease of use and deployment simplicity.



Easy Connection

TwistPort™ is the new definition of “easy”. By integrating the mechanical and the RF connection into the same structure, the connection of the radio to the antenna is brilliantly simple – “twist and lock” – and can be done with one hand!




TwistPort™ connectors are virtually lossless: there are no coaxial RF connectors or RF cables that cause significant signal loss. In comparison to widely used coaxial cables and connectors, the loss on TwistPortTM is almost immeasurable.


Cross-Platform Compatibility

UltraDish™ TP Antennas can be used with any radio with a TwistPort™ interface or with a variety of third-party radios connected through a TwistPort™ Adaptor.


Innovative Mount

UltraDish™ TP Antennas features a new innovative mounting system. The mount is separated from the antenna which makes the antenna installation and adjustment easy and quick.


Step 1: Bracket Installation

First install the bracket on the pole. Two sets of pole screws for different pole diameters are included.

The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.


Step 2: Antenna Adjustment

Simply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.


Only one tool is needed for the entire installation.

A single HEX tool is all you need to perform your installation.


UltraDish™ TP400 UltraDish™ TP550 Normal 30dBi antenna





Up to 30km

Up to 60km

Up to 60km




Submit a Comment

Your email address will not be published. Required fields are marked *